ASSEMBLY / OPERATING INSTRUCTIONS
To connect Plinths to End and Side Panels...
1
2
3
Stand one End Panel upside down on the floor.
The outside of the End Panel has two recessed holes
and two filler bolts showing.
Place the Plinth on to the bottom edge making
sure the protruding edge of the Plinth is facing
outwards.
Secure with 3 x 85mm bolts.
Repeat the procedure for the remaining End
Panel.
Stand one Side Panel upside down on the
floor.
Insert two wooden dowels in to the bottom
edge.
It is advisable that two people assemble the cot in the room in which it is to be
used.
As small parts are involved in assembly, children should be kept clear of the
assembly area.
Dispose of all packaging material immediately after the cot is assembled.
Identify all parts and components.
Clear an area on the floor for assembly and place a sheet on the floor to ensure
the cot is not scratched during assembly.
1a.
1b.
2a.
2b.
2c.
3a.
3b.
a.
b.
c.
d.
e.
DO NOT OVER TIGHTEN BOLTS. OVER TIGHTENING BOLTS CAN CAUSE PANELS TO CRACK.
WARNING
