8
ASSEMBLY / OPERATING INSTRUCTIONS
To fit Legs and footest continued...
1
2
3
4
Locate the two rear upper legs.
Line up the screw and the hole and turn clockwise until
the leg is firm.
Do not over-tighten.
Repeat for opposite side.
The chair should resemble the image as shown.
Lay chair face down.
Assemble cross brace onto upper legs, as per
image shown.
Ensure the ‘T’ sticker is on the cross brace on the top.
Ensure the ‘B’ sticker is on the cross brace on the
bottom.
Ensure the silver nuts on the cross brace are facing
you.
Assemble lower legs through the cross brace
housings and into the upper legs. Tighten until firm.
Stand chair upright.
Open Bottom Leg Cross Brace and place
underneath assembled chair.
For correct assembly, ensure the ‘F’ stickers on the
feethousings correspond to the front bottom legs.
1a.
1b.
1c.
1d.
2a.
3a.
3b.
3c.
3d.
3e.
3f.
3g.
3h.
3i.
4a.
Place the feet of the four legs into the corresponding
housings of the Bottom Leg Cross Brace.
