08
Restraints - Harness
1. To secure the child in the harness, place left hand
buckle prong (b) on top of (a).
2. Hold both left hand buckle prongs (a) and (b)
together and insert it into buckle housing (e) until
it snaps into position.
3. Repeat previous steps for right hand buckle
prongs (c) and (d).
4. Once all attached, carefully adjust the harness
straps by pulling each slider (f) until the desired
fit is achieved in the lap, shoulder and crotch
straps.
5. To release the buckles, squeeze the top and
bottom prongs (a) and (b), (c) and (d) together
until harness disengages.
CAUTION:
Always adjust the harness when changing
the seating position of the child.
Adjuster
Slide up or down
To adjust harness straps
To adjust straps, hold the strap with one hand and
slide the adjuster up or down the strap. Sliding the
adjuster down will loosen the strap, while sliding the
adjuster up will tighten the strap.
(a), (b): Left hand buckle prongs
(c), (d): Right hand buckle prongs
(e): Buckle housing
(f): Strap adjustment sliders
Assembly Instructions
f
f
f
f
f
a
b
c
d
e
