beautyrest Advanced Motion Base, Quick Setup And Installation Manual, Page: 3 / 6

STEP 3
STEP 4
STEP 5
STEP 6
To sync two bases with the Sync Cord, see installation
instructions in Owner’s Manual
Locate the battery backup strap
Store the battery backup strap in a
convenient location for emergency use.
For operating instructions, see owner's
manual.
Uncoil input cord (connected to
control box’s power port) and plug it
into Power Supply.
Carefully flip the base over onto its legs.
Important: Two people are required to move the bed base.
Do not drag frame across the floor or rest frame on its side, as
excessive pressure may damage the legs.
Uncoil Power Cord and connect to
Power Supply. Place Power Supply on
ground and extend from base. Ensure
that Power Supply and all attached
cords are directed toward the desired
surge protector.
STEP 8
REMOTE GUIDE
Install (3) AAA batteries in remote control.
Quickly test functions before placing mattress
on base to verify proper setup.
Press FLAT to return base to a flat position.
STEP 7
STEP 9
Plug the base and into a power source. A surge protector is
strongly recommended.
Setup is now complete! Test all functions on remote to ensure
proper setup. For more information please see Owner’s Manual
For customer support, visit www.ergomotion.com
or call: 1-888-550-3746
ADJUST
ONE TOUCH
Massage On/Off
FLAT preset position.
Lift and lower head section of base.
Install mattress retainer bars by inserting each end of the
retainer bar into the holes at the foot of the platform.