U
SER
M
ANUAL
4. F
USE
The fuse is at the rear of the unit. For replacing unscrew the fuse holder using a screw
driver and subsatute the defecave micro fuse with a new one as follows:
T 2.5A (for 115 V version: T 5A).
VII. S
PECIAL
SAFTEY
INSTRUCTIONS
Remove the mains plug before cleaning the unit or replacing the fuse
!
When turning off the device, always make sure that the unit is in Stand-By-Condiaon before
pressing the mains switch
①!
Clean the unit with a so| moist cloth. Take care that no water enters the housing of the unit.
A|er cleaning the unit rub it dry using a so| dry cloth.
Should a liquid or a foreign object of any kind find its way into the the unit, immeadiatly
O
NLY
USE
BURS
WITH
A
Ø 2.35
MM
SHAFT
!
Never use burs which are non-concentric, out of alignment or damaged.
We recommend to burs with a maximum head diameter of Ø 6mm.
Never exceed the maximum speed recommended by the bur manufacturer.
Always wear safety goggles for accident prevenaon.
At higher revs the handpiece motor is not running smothly (vibraaons in the handpiece), thus the chuck, ball
bearings, or bur may be damaged.
In case of doubts, always refer to the speed recommended by the bur manufacturer.
13
