BEATFOXX GA-40 Golden Age Jukebox, User Manual

Page: 10 / 12

problems with pairing please check the user manual of your BT
device for your reference. For operation use Start/Pause
(>II) , Stop,
Next (>>I ), Prev (I<<) and volume control on your BT-Device.
Accordingly you can use the keys on front of NJ-200 or keys on IR
remote control.
FM Radio: Press "Mode" button to enter the FM radio mode, the
LCD display will indicate FM radio frequency. Press "PREV/NEXT"
to select your desire station. For auto-scan memory function, press
"Auto" on the side panel to start searching and saving the available
radio frequencies. Once the saved radio frequency is saved. Press
"PRE+" or "PRE-" to select programmed station.
SD-Player / USB Player:
Press "Mode" button until led display
indicate "SD----" resp.
“USB----“
, then display will show number of
folder, then number of songs. For operation use Start/Pause (>II) ,
Stop, Next (>>I ), Prev (I<<) and volume control. Press "Next/Prev"
or "F+/-10" to select your desire song. Press "REP" once to repeat
one song, the REP indication at the top left corner on the led display
will flash. Press "REP" one more time to repeat all songs in the track
and the REP indication at the top left corner on the led display will
appear. Press "REP" again to cancel repeat function. To play songs
randomly, press "REP" button until the led display "RAN" on the
bottom of the display. For programming, press "STOP" button to
stop playback. Press "PROG" to enter programming mode. The led
display will flash and indicate "P 01", select the song that you want
to program and then press "PROG" again. Press "Play/Pause" to
stop programming and start to playback the programmed songs.
This unit can program up to 20 songs.
AUX IN: you can connect an external audio source to the NJ-200 by
using the 3.5mm stereo cable on side of device. Switch to
„AUX“
Jack out: you can connect an external mixer or amplifier to the
audio output on side of device.
E4
4