22
CARE & MAINTENANCE
WARNING
Avoid using water or other liquids for
cleaning. If water or other liquids enter the
Hover-1 Beast, it will cause permanent
damage to the internal components.
WARNING
Users who disassemble the Hover-1
Beast scooter without permission will
void the warranty.
The Hover-1 Beast comes with a replaceable lithium-ion battery. If you
are experiencing problems with your battery, please contact our
customer service department for steps on how to replace this battery,
This battery should only be replaced using the same model from the
same manufacturer listed below.
Battery Manufacturer: Shenzhen Elite Electronic Co., Ltd.
Battery Model: HY-CHH-1002U
To replace your battery, turn your Hover-1 Beast upside down, and
remove the two screws that hold your battery door in place.
Disconnect your lithium ion battery and remove it. Replace your
battery with a new battery provided to you from the Hover-1 support
team if required. Replace the battery door and affix the screws tightly.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Please note that changes or modifications not expressly approved
by the party responsible for compliance could void the user’s
authority to operate the equipment.
FCC INSTRUCTIONS FOR A CLASS B DIGITAL DEVICE OR PERIPHERAL
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• Do not expose the device to liquid, moisture, or humidity to avoid
damage to the product's internal circuitry.
• Do not use abrasive cleaning solvents to clean the device.
• Do not expose the device to extremely high or low temperatures as
this will shorten the life of the electronic device, destroy the battery,
and/or distort certain plastic parts.
• Do not dispose of the device in fire as it may explode or combust.
• Do not expose the device to contact with sharp objects as this will
cause scratches and damage.
• Do not allow the device fall from high places, as doing so may
damage the internal circuitry.
• Do not attempt to disassemble the device.
• Use only the charger provided by Hover-1.
