10
English
5 Button functions
6 Setting up
Take the device out of the package and remove all the packaging material. Open
the battery compartment on the back of the device and insert two 1.5V AAA
batteries. Make sure the polarity of the contacts is correct. Then close the battery
compartment.
The radio alarm clock now automatically tries to receive a radio signal. Press the
"WAVE" button if you want to cancel this step. The radio symbol in the display
disappears.
6.1 Manual time setting
Press and hold the "Time" button for about 2 seconds in time mode. The value
to be configured starts flashing. The values can be configured using the "UP" and
"DOWN" buttons and confirmed with the "Time" button. The setting sequence is
as follows:
12 or 24 hour
-
Time zone (-12 to + 12 hours)
-
Hour
-
Minute
-
Year
-
Month
-
Day
-
Language
(in which the day has to be displayed)
.
"Wave"
button
Press to enable or disable the radio mode
"Alarm"
button
•
Press and hold to access the alarm settings
•
Press to turn the alarm on or off
•
Press once in the alarm settings to confirm the setting
"Up" button
Increase the desired value (e.g. alarm time, time)
"Down”
button
Decrease the desired value (e.g. alarm time, time)
"Time"
button
Press and hold to access the time settings
"Snooze/
light" button
•
Enable the snooze function
• Enable the backlight
