When the machine shows E1, it is water
shortage reminder. The “ ” will light on and
you will hear beep. You can press power button
to turn off the machine and add water into water
tank.
Failure phenomenon
Solution
It shows E1
STORAGE
TROUBLESHOOTING
09
3. Finally, put the cutter assembly into the cup (as shown in Figure 5) so that the
drive assembly is aligned with the hole at the bottom of the cutter assembly.
Rotate the cutter handle counterclockwise to ensure that the cutter assembly
is installed in place, and then cover the cup lid until the shaft at the top of the
cutter assembly is aligned with the rotating shaft hole at the bottom of the cup
lid (as shown in Figure 6).
Note:
Please be careful not to hurt your hands during disassembly and assembly.
The appliance after cooling and drying should be stored in a dry place together
with the manual.
Figure 5
Figure 6
It not works when
plugged on
Firstly, check that the blender cup and lid all
installed into place. As our baby food maker is
equipped with security locks, only when blender
cup and lid all installed into place can machine
be power on.
Summary of Contents for SJJ-R03B5-WHITE
Page 12: ......
