20
Power on the Beandevice
®
: hold the
magnet next to ON/OFF non-contact
push button for more than 2 seconds.
The Activity/Failure Led will blink in
green
color.
For the first use, you need to pair your
Beandevice
®
to your BeanGateway
®
.
Hold the magnet on the label Network
for more than 2 seconds until that
Acivity/Failure Led blinks in
Red
color.
Default factory paramaters will be
restored.
7.
8.
9.
Click on the BeanDevice
®
that showed up on the left side pane
Now you can see the screen for monitoring and configuring the Beandevice
®
and
its related sensor channels.
Figure 14 :
Power on your BeanDevice
®
Figure 15 :
Connect the BeanDevice
®
to the
BeanGateway
®
Figure 16
:
Add to Firewall
Eco
Sensor
Magnet
ON/OFF “Reed”
non-contact push button
Magnet
Network “Reed”
non-contact push button