- 4 -
DMX control
Connect the machine directly to a DMX controller or a DMX loop with multiple DMX effects. The machine uses a
3-pin XLR connector for DMX connection.
Address Setup:
Press the MODE button a number of times until Add appears on the display, with the UP /
DOWN buttons the start address may be set. The start address is defined as a first channel to which the
machine will respond to. Check that there are no overlapping channels used!
Note
: It is necessary always lock the DMX loop with a 120 Ohm terminator for correct data transmission.
Location
Select a location where it is easy to fill the tank. It is also possible to hang the unit by means of the supplied
holder and fixing screws.
Switching the unit off
Switch the unit off by unplugging it from the mains. Otherwise the 2000W heating element will draw
unnecessarily current.
CHANNEL
VALUE
FUNCTION
1
0
– 100%
Smoke level
2
No function
3
000
LEDs OFF
001
– 010
Color Change
011
– 020
Blue
021
– 030
Red
021
– 040
Green
041
– 050
Blue strobe
051
– 060
Red strobe
061
– 070
Green strobe
071
– 080
Blue fade
081
– 090
Red fade
091
– 100
Green fade
101
– 110
Blue/Red/Green fade
111
– 255
Color Change
4
0
– 100%
Fade/change speed
function