the terminal should connect with 120 Resistor to avoid signal
disturbing.
2. Address allocation:
DMX 512 supports 512 channels. If every laser has 16 channels,
so is can connect 32 pieces of lasers. Usually, RGB LED has 3
channels, so DMX 512 console can connect 170 pieces of LED in
every line.
3. How to set address code switch:
Address code setting: In the binary system, the first has 0 and 1
numerical value, and it corresponds with Switch “OFF” and “ON”.
When calculating, meet 2 into, as shown below:
LOOP ADDR BINARY USAGE OF DIP SWITCH
First laser 1 000000001 =
Second laser 12 000001100 =
Third laser 23 000010111=
Forth laser 34 000100010=