Beamz DMX384, Instruction Manual, Page: 8 / 32

8
4.4 EDIT CHASE (COPY BANK INTO CHASE)
1) Press and hold the PROGRAM button to enter
programming mode.
2) Press the desired
CHASE button.
3) Select the
BANK to be copied using the BANK
UP/DOWN buttons.
4) Press MUSIC/BANK COPY button to prepare copy.
5) Press
MIDI/ADD button to copy the bank. All LEDs will
blink.
4.5 EDIT CHASE (COPY SCENE INTO CHASE)
1) Press and hold the PROGRAM button to enter
programming mode.
2) Press the desired
CHASE button.
3) Select the
BANK that contains the scene to be copied
using the BANK UP/DOWN buttons
4) Press the SCENE button that corresponds to the scene
to be copied.
5) Press
MIDI/ADD button to copy the scene. All LEDs will
blink.
4.6 EDIT CHASE (INSERT SCENE INTO A CHASE)
1) Press and hold the PROGRAM button to enter
programming mode.
2) Press the desired
CHASE button.
3) Press the
TAPSYNC DISPLAY to switch the LED
display to steps view.
4) Use the
BANK UP/DOWN buttons to navigate steps and
locate the insert point of the new scene. The display will
read the step number.
5) Press
MIDI/ADD button to prepare the insert.
6) Use the BANK UP/DOWN button to locate the SCENE .
7) Press the
SCENE button that corresponds to the scene
to be inserted.
8) Press
MIDI/ADD button to insert the scene. All LEDs will
blink.
Notes: To insert a scene between Steps 05 and 06
navigate using BANK buttons until the display reads
STEP05.
4.7 DELETE A SCENE IN A CHASE
1) Press and hold the PROGRAM button to enter
programming mode.
2) Press the desired
CHASE button that contains the scene
to be deleted.
3) Press the
TAPSYNC/DISPLAY button to switch the LED
display to steps.
4) Select the scene/step to be deleted using the BANK
UP/DOWN buttons.
5) Press
AUTO DEL button to delete the step/scene. All
LEDs will blink.
4.8 DELETE A CHASE
1) Press and hold the PROGRAM button to enter
programming mode.
2) Press the
CHASE button (1~6) to be deleted.
3) Press and hold AUTO DEL button and the respective
button to delete the chase. All LEDs will blink.
4.9 DELETE ALL CHASE PROGRAMS
CAUTION! This procedure will result in irrevocable loss of chase step memory. The individual scenes and program banks will
be preserved.
1) Turn OFF controller.
2) Press and hold the
BANK DOWN button and the AUTO
DEL button while turning ON the controller.
3) All LEDs will blink