Beamz 153.272, Instruction Manual

Page: 7 / 12

7
FIXTURE CLEANING
The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize light
output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or particularly dirty
surrounding can cause greater accumulation of dirt on the unit’s optics.
•
Make sure the area below the installation place is free from unwanted persons during servicing
•
Housings, fixations and installations spots( ceiling, truss, suspensions) should be totally free from any
deformation
•
The mains cables must be in impeccable condition and should be replaced immediately when even a small
problem is detected
•
In order to protect the fixture from overheat the cooling fans (if any) and ventilation openings should be cleaned
monthly.
•
The interior of the fixture should be cleaned annually using a vacuum cleaner or air-jet.
•
Clean with soft cloth using normal glass cleaning fluid.
•
Always dry the parts carefully.
•
Clean the external optics at least every 20 days. Clean the internal optics at least every 30/60 days.
HOW TO CONTROL THE UNIT
Three ways to operation:
A. Master/Slave mode
B. Sound active and Auto mode
C. DMX controller
MODE MENU UP - DOWN
DMX MODE 5CH
(ch. 1-512)
DMX MODE 6CH
(ch. 1-512)
AUTO MODE
(program 1 – 4)
(speed 1 – 9))
SOUND MODE
(program 1 – 4)
(speed 1 – 9)
ATTENTION: We strongly recommend internal cleaning to be carried out by qualified
worker!