www.beamzlighting.com
1. Safety Instruction
■
Please keep this User Manual for future consultation. If you sell the unit to another user, be sure that they also receive this
instruction booklet.
■
Unpack and check carefully there is no transportation damage before using the unit.
■
Before operating, ensure that the voltage and frequency of power supply match the power requirements of the unit.
■
It’s important to ground the yellow/green conductor to earth in order to avoid electric
shock.
■
The unit is for indoor use only and use only in a dry location.
■
The unit must be installed in a location with adequate ventilation, at least 50cm from
adjacent surfaces. Be sure that no ventilation slots are blocked.
■
Disconnect mains power before fuse replacement or servicing.
■
Replace fuse only with the same type.
■
Make sure there are not flammable materials close to the unit while operating as it is fire hazard.
■
Use safety cable when fixes this unit.
■
In the event of serious operating problem, stop using the unit immediately. Never try to repair the unit by yourself. Repair
carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized technical assistance
center and always use the same type spare parts.
■
Do not touch any wire during operation as high voltage might be causing electric shock.
2. Technical Specification
• It can be operated by DMX512 control or can be used as an individual unit without
controller.
• It can be linked together as many as required in master/slave mode, and perform the great
built-in programmed lighting shows triggered by music.
• Please use a 3 pin XLR cable/plug when connecting them together.
• Fan cooled.
Supply Voltage: AC110
～
240V 50/60HZ
Power: 30W
LED: 180
×
10mm LEDs RGB Red 61 LEDs, Green 60 LEDs, Blue 59 LEDs.
Fuse: 3A
Control Signal
：
DMX signal
Channel: 6 Channels
Function: DMX, Master-Slave, Auto, Sound active.
Dimensions per unit: 220 X 220 X325mm
Weight (per unit): 2.8 kg
Please read the instruction carefully which including important
information about the installation, operation and maintenance.