DATA
ANTENNA
48V
.7A
Step 3 - Connecting the cables ...
There are three cables for you to connect:
• Antenna cable
• Power supply cable
• Ethernet cable
All cables connect to the back panel of the BRU-150 Transceiver.
Antenna Cable
(10 feet)
Power Supply
(11 feet)
Ethernet Cable
After you have connected all the
the cables to the BRU-150, plug the
power supply into the wall outlet
and observe the lights on the front
panel as described in Step 4.
BRU-150
Transceiver
110 or
220 Volts
If the supplied Ethernet cable
is too short, you can use a
cable up to 300 feet long.
Connect to
Ethernet Card
