Ch. 4 Status Monitor
Remote Unit Installation
Overview
Service Utilities
40
Pre-Production
1106333-01
Revision 3
Overview
The three tabbed pages in the status monitor window provide the following
functions:
•
Signal Strength Monitor
–
Displays the signal strength from the base station
–
Displays base code, link status, and signal strength data
–
Provides links to detailed reports on signal strength and the
message log
•
IP Address Setting
–
Sets a new IP address in the remote unit
•
Diagnostics
–
Tests connectivity between the host PC and the remote unit, and
between the remote unit and the base station.
Open the status monitor by executing the file
BRU-Mon.exe
.
The status monitor is also installed on the subscriber’s computer during
the installation process. It is intended to provide limited functionality to
technically-oriented subscribers. For the less technical subscribers, it is an
information source they may be asked to read during a telephone technical
support session.
