BEAMEX MC6-T, Manual, Page: 48 / 172

48 - Active Terminals and Connections
value is needed. The soft numeric keypad opens when you tap on the
generated/simulated value (see Figure 32: Soft Numeric Keypad ).Tap on
numbers to enter a value. Additional functions:
• Use the "
C
" key on the right to clear the entered value.
• Use the " Left Arrow " key to delete the number to the left of the cursor.
Figure 32: Soft Numeric Keypad
The entered value is taken into use when you close the window using the
" Accept " button. Note that MC6-T may use the entered value as a source
for the value's resolution. Enter trailing zeros to ensure useful resolution.
When applicable, the minimum and maximum limit of the entered value is
shown above the entered number. If you enter a value above/below the
limits, and try to accept it, MC6-T stays in the soft numeric keypad window
and replaces the entered value with appropriate limit value and highlights
the replaced value.
Spinning
Spinning is a tool that is available in Calibrator and Documenting
Calibrator . It is useful when making small changes to an existing numeric
value, one digit at a time.
Figure 33: Inactive spinner