Beam IsatDock LITE, User Manual, Page: 18 / 29

BETA – IsatDock Overview
Beam Communications
STRICTLY CONFIDENTIAL
Page 18 of 29
There are four keyhole shaped slots in the mounting bracket that mate with feet on the rear of the
plastics. To attach the bracket, the larger end of the keyhole will pass over the feet (see ‘B’ below).
The bracket is then slid up to lock the feet into the narrow section of the keyhole.
A – Align Keyholes with feet B – Initial Position C – Final Position
Figure 19 – Fitting the Mounting Bracket
4.5. PRO/MARINE – Mounting Bracket
If the PRO/MARINE docking station is to be mounted vertically, the bracket is first mounted to the
wall and the docking station then attaches to the bracket. There are the options of nine mounting
holes in the bracket or if required, extra holes could be drilled in the bracket to mate with the
intended surface.
The mounting bracket is then attached to the docking station via four ‘mushroom’ shaped feet.