manualshive.com logo in svg

Beam Electrolux Alliance Solaire, Manual, Page: 3 / 7

Share
Download
Beam Electrolux Alliance Solaire Manual Download Page 3

3

Congratulations on your purchase of the BEAM 

Alliance

 Central Vacuum System, the ultimate 

cleaning solution. The BEAM 

Alliance

 Central Vacuum System is designed to help you efficiently 

clean and maintain your home. While vacuuming may never be truly pleasurable, you can have a 
cleaner, healthier home. . . and more time to do the things you really enjoy. 

Your BEAM 

Alliance

 Solaire Cleaning Set has been designed to work only with the BEAM 

Alliance

 Central Vacuum System.  Any use with another central vacuum system may cause 

damage to the system components and void the warranty.

To achieve the maximum benefits from your BEAM 

Alliance

 Solaire Cleaning Set, please 

read this manual carefully.

For more information regarding BEAM and other innovative products from BEAM, 
visit www.beam.com.

TELESCOPIC WAND FEATURES

• Handle release button

• Depress foot pedal to release wand

• Telescopic wand slide adjustment

Figure 1.

• Variable speed control

Summary of Contents for Alliance Solaire








Reviews:

No comments