Beale Xpress TIC651, Installation Manual, Page: 10 / 16

10
Installation
• With the speaker/bezel assembly installed in the wall, using a level,
square the bezel to the wall and then turn the ‘dog screws’ to secure the
speaker and bezel to the drywall.
Turn screws to extend dogs
to lock speaker and bezel
to drywall
Turn screws to extend dogs
to lock speaker and bezel
to drywall
• Attach square grille to bezel. The grille attaches with magnets so it will
just snap into place.
Adapting the Square Grille to an installed Round Speaker
• You can adapt the square bezel/grille to an installed round speaker by
cutting one of the thin sides of the bezel, loosening the dogs on the
installed speaker just enough to create a space between the speaker
and drywall and then slipping the bezel around the speaker. Square
the bezel to the wall and then tighten the ‘dog screws’ to secure the
speaker and bezel to the drywall. Install the square grille.
PAINTING
The grille may be painted, but go as light as possible to not to clog the fine
holes with paint. Only paint grilles when they have been removed from
the speakers and be sure to remove the cloth on the backside of the grille
before painting. If the cloth is not removed for painting, it will absorb the
paint and clog the grille, significantly affecting the sound...and not in a good
way. (We have taken great effort to eliminate any ‘color’ from the sound of
our speakers, so let’s try to keep it that way...OK?)