Beale Street Audio IWLCR4 Series Installation Manual Download Page 3

3

Speaker Placement

Even though the Beale Street Audio IWLCR4s have a shallow mounting 

depth of less than 4” when installing in wall/in ceiling speakers, (or in 

wall/in ceiling anything for that matter) it is always a good idea to find out 

what is in the wall/ceiling before cutting holes. Be aware of the location 

of plumbing, electrical and structural elements that may affect speaker 

placement.

Stereo

It is also a good idea to locate stereo speakers so they are centered to 

the main listening position in which the user/s will normally be located. 

Whenever possible, try to position the left and right speakers at the same 

distance from each other as they are from the main listening position.

Subwoofer

Subwoofers are omni-directional so placement of in wall/in ceiling subs is 

somewhat less critical, but placement can be affected (good and bad) by 

corners and walls, so try to find a location that will be somewhat unaffected 

by placement.

Front

Left

Front

Right

Video Display

Beale In-Ceiling

or LCR

Beale

In-Ceiling Sub

Surround

Left

Surround

Right

Main

Listening

Position

Optional

Surround

Right

Optional

Surround

Left

30°

30°

30°

30°

20°

20°

A

B

C

A=B=C

Beale In-Ceiling

or LCR

Beale In-Ceiling

or LCR

Beale In-Ceiling

or LCR

Beale In-Ceiling

or LCR

Beale In-Ceiling

or LCR

Beale In-Ceiling

or LCR

Summary of Contents for IWLCR4 Series













Reviews: