6
E N G L I S H
Removing Bracelet From Loom
and Adding Clasp
To remove base from loom, turn
loom over and cut warp threads
at back post.
1
To add a clasp, divide the threads
on one end, grouping two
strands, three strands, and two
strands. Tie each group of threads
close to the base beads and cut off
excess threads.
2
Count 3 rows down on the right
side of base. Insert a needle and
thread through row 3 and back
through rows 2 and 1. Your needle
will end up on left side.
5
Repeat above to opposite end of
bracelet. Cut off excess ends close
to the knots.
4
Apply small amount of Beadalon
GS Hypo to each knot, let dry.
3
Pick up 3 size 8/0 beads with
needle and then run needle and
thread through first eye in clasp.
6
