Beaba UM 800, Instructions Manual

Page: 13 / 48

mains socket. Do not try to tamper with it, but contact the retailer or
a service center authorized by the distributor.
• The appliance must be cleaned and dried carefully at the end of
each use.
• If the appliance has not been used for a long period of time, it must
be stored as explained in “Cleaning and maintenance” paragraph.
• When the appliance is not used anymore, it is recommended to
make it unusable, cutting the power cord after having unplugged it
from the mains socket.
• Do not dispose of this product as normal urban refuse, but dispose
of it as electrical appliance (RAEE) according to the rules of the
differentiated collection requested by the CE law.
• In order to avoid fire risk, do not place power cord under carpets or
near radiators, stoves.
• Do not keep the humidifier in high-temperature environments.
• The features of the products may vary without notification.
• If you have any doubts on the content of this instruction manual,
please contact the retailer or distributor.
COMPOSITION
a. Adjustable vapour nozzle (air outlet)
b. Water capacity
c. Water level sensor
d. Adjustable water vapour button
e. Minimum hydrometric rate
f. Filler cap
g. Water reservoir
h. Base/Product base
INSTRUCTIONS
Please read the instructions below before switching on your
humidifier.
To fill the water reservoir:
- Remove the “adjustable vapour nozzle”. (a)
- Lift out the water reservoir and turn it upside down. (g)
- Open the water reservoir lid (unscrew the lid). (f)
- Fill the reservoir with wate. (g)
- Close the lid of the water reservoir. (f)
- Turn the water reservoir upright and place it on the humidifier base.
- Insert the “adjustable vapour nozzle”. (a)
To use the humidifier:
- Plug in the device using the power cable.
- Turn the button for controlling the vapour to the desired position:
adjust the intensity of the humidifier to the desired level:
• “Min” for low intensity water vapour. (e)
• “Max” for high intensity water vapour.
- After a few seconds, a mist will start to appear from the adjustable
vapour nozzle
- Switch off the humidifier after use.
To empty the humidifier:
- Switch off the humidifier, turn the button to the left, and make sure
that the light indicator is not on. (d)
- Unplug the device.
- Remove the water reservoir from the product base. (g)
- Empty the water in the reservoir.
- Wipe off any droplets on the product with a soft cloth.
BEABA_notice humidificateur.indd 13 05/11/2015 10:35