13
does not fit fully into the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician. Do not attempt to modify
the plug in any way.
36. SAVE THESE INSTRUCTIONS.
OPERATION
BEFORE FIRST USE
• Unpack all of the appliance components.
• Clean all parts (see
“CLEANING AND MAINTENANCE”
).
Before using this appliance, it is recommended to firstly clean the appliance and
related accessories thoroughly.
IMPORTANT
Read before using.
The device’s various heating time settings have been programmed for a standard
Beaba plastic feeding bottle. Some feeding bottles may present differences in
temperature. Therefore, it is necessary to adjust the device’s heating time to the
type of bottle used:
Wide-neck bottle Reduce heating time (according to the type of bottle)
Glass bottle
Greatly reduce heating time (according to the type of bottle)
To change heating time, move the program button (to the left –> decrease/ to the
right –> increase). Also:
• Heating time for a Beaba standard bottle is programmed for an initial temperature
of 20°C (68°F) or 5°C (41°F) and any variation in the initial water temperature will
have an effect on the final temperature.
• In the event of a subsequent heating cycle within an hour, heating time must be
reduced.
• For an optimal temperature, the feeding bottle should be removed when the
light switches off. Therefore, the warming function described in the instructions
should be used with caution.
It is extremely important to always check the temperature of the feeding
bottle contents before giving it to the child.
USING THE APPLIANCE
Warming baby bottle (water or milk) or baby food jar
• Fill the water tank in the base with MAX level water.
• Put the tray into the heating unit.
• Fill baby bottle with desired amount of water or milk.
• Place the baby bottle on tray.
• Put the steam cover on base, then turn clockwise to fix in position.
• Connect unit to power source.
Summary of Contents for BABYMILK SECOND
Page 1: ...BABYMILK SECOND...
Page 2: ...3 1 5 2 7 8 3 4 9 6 10...