BEA MAGIC SWITCH MS09 Quick Start Manual Download Page 1

4

1

2

3

MAGIC SWITCH:  MS09

Technology:

microwave motion sensor

Radiated frequency:

24.125 GHz

Radiated power density:

< 5 mW/cm

2

Supply voltage:

to be operated from SELV-compatible 

power supplies only

12 – 24 VAC ±10%

12 – 24 VDC +30% / -10%

Supply frequency:

50 – 60 Hz

Power consumption:

< 1.5W

Output

relay contact rating (max. voltage):

relay contact rating (max. current):

Max. switching power:

relay with switch-over contact (voltage-free)

60 VDC / 125 VAC

1A (resistive)

30W DC / 60 VAC

Detection range*:

4 – 24” (adjustable)

Detection mode:

motion (bidirectional)

Output hold time:

0.5 – 30 sec

Temperature range:

-4 – 131 °F (-20 – 55 °C)

Weight:

0.34 lbs

Material:

ASA, PC

IP rating:

IP65

Certification:

Electromagnetic compatibility (EMC) according to 2004/108/EC

FCC:  G9B-210161

   IC:  4680A-210161

75.5746.05 MS09 20210115 

 

Page 1 of 4

TECHNICAL SPECIFICATIONS 

DESCRIPTION

Visit website for 

available languages of 

this document.

IP65, touchless, activation sensor

ENGLISH

1. Faceplace
2. Microwave motion sensor
3. Connector
4. Housing

Specifications are subject to change without prior notice.

All values measured in specific conditions.

*  Detection range is dependent upon object size, object orientation, object speed, and environmental conditions.

Summary of Contents for MAGIC SWITCH MS09

Page 1: ...etection mode motion bidirectional Output hold time 0 5 30 sec Temperature range 4 131 F 20 55 C Weight 0 34 lbs Material ASA PC IP rating IP65 Certification Electromagnetic compatibility EMC according to 2004 108 EC FCC G9B 210161 IC 4680A 210161 75 5746 05 MS09 20210115 Page 1 of 4 TECHNICAL SPECIFICATIONS DESCRIPTION Visit website for available languages of this document IP65 touchless activati...

Page 2: ...he door control move the 2 wires from the activation circuit to power see Technical Specifications for power information TIPS Industrial Doors Cleanrooms Only trained and qualified personnel are recommended to install and set up the sensor The warranty is invalid if unauthorized repairs are made or attempted by unauthorized personnel Always test the proper operation of the installation before leav...

Page 3: ... occurs For the 900 MHz wireless programming instructions please reference BEA User s Guide 75 5937 which comes with the 900 MHz wireless receiver sold separately WIRELESS FUNCTIONALITY SETTINGS ADJUSTMENTS TROUBLESHOOTING Can t find your answer Visit www beainc com or scan QR code for Frequently Asked Questions Sensor does not seem to detect Bad or no power Check power supply Detection range too ...

Page 4: ... exploitation est autorisée aux deux conditions suivantes 1 l appareil ne doit pas produire de brouillage et 2 l utilisateur de l appareil doit accepter tout brouillage radioélectrique subi même si le brouillage est susceptible d en compromettre le fonctionnement BEA Inc the sensor manufacturer cannot be held responsible for incorrect installations or incorrect adjustments of the sensor device the...

Reviews: