4
BEA SA | LIEGE Science Park | ALLÉE DES NOISETIERS 5 - 4031 ANGLEUR [BELGIUM] | T +32 4 361 65 65 | F +32 4 361 28 58 | [email protected] | WWW.BEASENSORS.COM
Technology
Microwave motion sensor
Radiated frequency
24.150 GHz
Radiated power
< 20 dBm EIRP
Radiated power density
< 5mW/cm
2
Detection range (hand)
+/- 10 to 60 cm if movement towards sensor at 90° (adjustable)*
Detection mode
Motion (bidirectional)
Speed of target to create detection
Min. 5Hz or +/- 3cm/s, Max. 200Hz or +/- 1.2m/s
Supply voltage**
12 - 24V AC +/- 10% (50 - 60 Hz)
12 - 24V DC +30% / - 10%
Power consumption
< 1.5W
Output**
Max. voltage
Max. current
Electronic relay (galvanic isolation - polarity free)
42V DC / 30V AC
100 mA
Output hold time
0.5s (in PULSE mode)
Temperature range
-20°C to +55°C
Degree of protection
IP65 with front face and gasket mounted on a smooth surface
Material
PMMA / PC
Front face is treated with biomaster silver biocide tested to ISO
22196:2011. Please use biocides responsibly.
Wiring cable
Stranded cable up to 16 AWG - 1.5mm
2
Door does not open even
when moving the hand
towards the sensor.
Bad or no power supply.
Check power supply.
If LED switches on or flashes,
power connection is OK.
Detection range is too short.
Adjust the detection range.
Remove any metal plates in front of the sensor.
Incorrect wiring / connection.
Check wiring and relay connection.
Sensor stays in detection.
The environment influences the
good functioning of the sensor.
Remove any moving object around the sensor.
Incorrect wiring / connection.
Check wiring and relay connection.
Door remains open after
detection/activation.
Wrong output mode.
Switch the output mode to PULSE.
Incorrect wiring / connection.
Check wiring and relay connection.
TROUBLESHOOTING
* An adjustment of the detection field below 10 cm is possible but the detection capability of the sensor can not be guaranteed.
Technical specifications are subject to changes.
BEA hereby declares that the MAGIC SWITCH CHROMA is in compliance with European Directives 2014/53/EU
(RED) and 2011/65/EU (RoHS).
The full text of the EU declaration of conformity is available on our website.
This product should be disposed of separately from unsorted municipal waste.
TECHNICAL SPECIFICATIONS
©
BE
A
|
O
ri
gi
na
l i
ns
tr
uc
ti
on
s
|
47.
03
81
/ V
3
-
1
0.
21
-
PL
EA
SE K
EE
P F
O
R F
U
R
TH
ER U
SE - D
ES
IG
N
ED F
O
R C
O
LO
U
R P
R
IN
TI
N
G
** External electrical sources must be within specified voltages, max 15W and ensure double insulation from primary voltages.
