1
2
A
B
+
0 1 2 3 4
5 6 7
8 9
5
OVERVIEW OF SETTINGS
Back
More
IR: WIDTH
IR: NUMBER
IR: PRESENCE TIME
IR: OUTPUT
REDIRECTION
FACTORY RESET
More
Back
Back
More
PRESETTINGS
IR: IMMUNITY
IR: FREQUENCY
More
Back
ZIP CODE
all parameter settings in zipped format
(see application note on ZIP CODE)
ID #
unique ID-number
ERROR LOG
last 10 day indication
IR: SPOTVIEW
view of spot(s) that trigger detection
IR: C1 ENERG
signal amplitude received on curtain 1
IR: C2 ENERG
signal amplitude received on curtain 2
POWERSUPPLY
supply voltage at power connector
OPERATINGTIME
power duration since first startup
RESET LOG
delete all saved errors
PASSWORD
LCD and remotre control password
(0000= no password)
LANGUAGE
language of LCD-menu
ADMIN
enter code to access admin mode
standard critical
env.
shopping
street
For conformity to EN 16005 or DIN 18650 at a
mounting height of 2.8 or more, use values 6 and 7.
For conformity to BS 7036 at a mounting height
of 2.2 m or more, use values 6 and 7.
Sensors mounted close to each other should
have a different frequency.
increased immunity
increased immunity, 1 curtain
factory values for IR immunity and IR number
service
mode
motion
15 s
30 s
1
min
2
min
5
min
10
min
20 min 60 min infinite
service mode = no IR detection during 15 minutes (maintenance).
This value excludes conformity of the door system to EN 16005 and DIN 18650.
min. value for DIN18650: 1 min
min. value for EN16005: 30 s
BASIC
ADV
ANCED
DIAGNOSTICS
Always additionally adjust
the arrow position on the
sensor with a screwdriver.
excludes conformity of the door system
according to EN 16005 / DIN 18650 / BS 7036
NO
NC
NC
NC
NC
NO
NO
NO
NO: normally open
NC: normally closed
low
normal
high
normal
high
higher highest
< 2.8 m
> 2.8 m
full
reset
partial
reset
partial: outputs are
not reset
factory value
safety
safety
+
opening
0 presence detection on safety input
1 presence detection on safety and opening input
