6
1 9/16
1 1/16
1 1/16
1 1/16
4 1/8
1/2
1 1/4
1 1/2
1
2
3
7
1
2
8
0-9
1-6
XL
ft. 6.5 3 0 3 6.5
26 23 19.5 16.5 13 10 6.5 3 ft
FALCON XL
Mounting height: 8 ft
23 ft 16 ft 11.5 ft 8 ft
3 3 3 3
4 4 4 4
5 5 5 4
6 6 6 5
15
°
30
°
45
°
> 45
°
ft. 6.5 3 0 3 6.5
26 23 19.5 16.5 13 10 6.5 3 ft
FALCON
Mounting height: 16 ft
ft. 6.5 3 0 3 6.5
26 23 19.5 16.5 13 10 6.5 3 ft
FALCON
Mounting height: 11.5 ft
75.5678.04 20111104
Page 3 of 5
COM
NO
NC
12-24 V
AC-DC
Red
Black
White
Green
Yellow
Position the sensor on the
bracket and fasten the screws
firmly.
MOUNTING & WIRING
Adjust the angle of the sensor to position the detection field.
Remove the bracket from
the sensor. Drill 2 holes
accordingly. Afix the bracket
firmly.
Connect the wires to the door
controller. Choose between
NO and NC contact.
DETECTION FIELD ADJUSTMENTS
Adjust the field size with the remote
control or the push buttons.
All detection field dimensions were measured in optimal conditions and with field size value 9.
CEILING
WALL
Choose the right detection filter for your application with the remote control or the push buttons:
Value recommendations according to angle and height:
Detection of all targets
(pedestrians and parallel traffic are detected)
1 = no specific filter
2 = filter against disturbances
(recommended in case of vibrations,
rain etc.)
Detection only of vehicles moving towards the sensor*
(pedestrians and parallel traffic are not de disturbances are filtered)
* The vehicle detection filter increases the response time of the sensor.
DETECTION FILTER - PEDESTRIAN REJECTION - VEHICLE DETECTION
Always check if the chosen value is
optimal for the application. The
object approach angle, speed, size
and nature can influence it’s
detection.
