1/8
EAGLE
EAGLE
EAGLE
EAGLE X
X
X
X----MTF
MTF
MTF
MTF
USER’S GUIDE
INDOOR UNIDIRECTIONAL MOTION SENSOR
FOR QUASI-PRESENCE DETECTION OF PERSONS
Technology
:
microwave and
microprocessor
Transmitter frequency
:
24.175 GHz
Transmitter radiated power
:
< 20 dBm EIRP
Transmitter power density
:
< 5 mW/cm²
Mounting height
•
Standard
:
from 1.8 m to 3 m
•
High
:
from 3 m to 4 m *
Tilt angles
:
0° to 90° vertical
-30° to + 30° lateral
Detection area
(mounting height = 2.2m)
:
1.5m (W) x 2m (D)
Detection mode
:
motion, quasi-presence
detection of persons
Minimum speed
:
2 cm/s (measured in the
sensor axis)
Supply voltage
:
12V to 24V AC ±10%
12V to 24V DC +30% / -10%
Mains frequency
:
50 to 60 Hz
Power consumption
:
< 2W (VA)
Output relay
(free of potential change-over contact)
•
Max. contact voltage
:
42V AC - 60V DC
•
Max. contact current
:
1A (resistive)
•
Max. switching power
:
30W (DC) / 60VA (AC)
Hold time
:
0.5 s to 9 s (adjustable)
Temperature range
:
-20°C to +55°C
Application
:
indoor use only
Degree of protection
:
IP54
Norms and conformity
:
EMC 2004/108/EC
Dimensions
:
120 mm (W) x 80 mm (H) x 50 mm (D)
Weight
:
0.215 kg
Material
:
ABS
Color of housing
:
anthracite gray, aluminum finish
or white
Length of cable
:
2.5 m
Manual adjustment
•
Sensitivity (by push buttons)
•
Orientation of sensing field (mechanically)
Remote control adjustments
•
Sensitivity
•
Hold time
•
X-MTF Sensitivity
•
Detection mode
•
Immunity
•
Mounting height
•
Output configuration
•
Door control
•
Security
:
:
:
:
:
:
:
:
:
10 levels
from 0.5s to 9s in 10 levels
9 levels
uni-/bidirectional, MTF, reverse mode
low immunity, normal, increased
immunity
standard, high
active/passive
automatic, permanently open/closed
1-4 digit access code
* only in appropriate areas
Terminal block
Cable openings
Infrared receiver
LED
Push buttons
Lateral antenna position
adjustment
Planar antenna
Vertical antenna position
adjustment
The sensor must be firmly
fastened to prevent from
vibrating.
The sensor must not be
placed directly behind a
panel or any kind of
material.
The sensor must not
have any object likely to
move or vibrate in its
sensing field.
The sensor must not
have any fluorescent
lighting in its sensing
field.
To avoid damage by
electrostatic discharges,
do not touch any
electronic part of the
sensor.
DESCRIPTION OF
THE SENSOR
INSTALLATION
TIPS
INTERNAL VIEW
HOUSING
(INTERNAL VIEW)
TECHNICAL
SPECIFICATION
