5 Installation (Continued)
6
Attach Transmitter
CAUTION: IF THE TRANSMITTER IS ALLOWED TO HANG DOWN INSIDE THE BOLLARD, ERRATIC OPERATION MAY OCCUR.
1. If using the transmitter for this application, attach transmitter to mounting tray with velcro pad included in the package. Hardwired systems do
not require this step.
2. Attach plastic cap to top of the post with three cap mounting screws. Tighten screws with hex key included in the pushplate package.
TRANSMITTER MOUNTING TRAY
ATTACH
TRANSMITTER
HERE
Do not leave problems unresolved. If a satisfactory solution cannot be achieved after troubleshooting a problem, please
call BEA, Inc. If you must wait for the following workday to call BEA, leave the door inoperable until satisfactory repairs
can be made. Never sacrifice the safe operation of the automatic door or gate for an incomplete solution.
The following numbers can be called 24 hours a day, 7 days a week. For more information visit www.beasensors.com.
West:
South-East:
US and Canada:
1-888-419-2564
1-800-407-4545
1-866-249-7937
Mid-West:
North-East:
Canada:
1-888-308-8843
1-866-836-1863
1-866-836-1863
6 Company Contact
NOTE: PANTHER PUSHPLATES DO NOT
REQUIRE A TRANSMITTER.
Page 4 of 4
75.0131.05 20080606
ATTACH TO PUSHPLATE
