Caution
When the battery pack is low or the drive requires too much torque, the
tool may stall at the bottom of the drive (before the clutch can disengage).
Continuous operation in this manner can cause over-heating and
permanent damage.
Reverse knob
Press
1.To remove the belt, pull it
upwards through the top of
the nosepiece. When a screw
is out of position or if it jams,
pull the belt downwards while
pressing the reverse knob.
Replaceable Non Slip Pad
To remove the screw belt from the auto feed attachment
1.The non slip pad is self
replaceable when
damaged.
31