Rainbow 36 V NBC-Filtration & Ventilation System
Rainbow 36 V
Ventilation and Air Filtration System
for a Residential Safe Room
·
www.beind.co.il
9
|
1.6 m
3
2
1
3
1
2
Second Position
Attach the manual blower to the
adapter (assembled on the wall).
In a residential safety room in which
the air inlet valve is located at a
height over 1.6 meters:
Step 1
Take out the bracket from the cabinet (the bracket
is located at the bottom of the manual blower).
Open the two rear tabs
(1)
and attach the flexible
hose
(2)
to it.
Attach the bracket to the adapter on the wall by
means of sliding the bottom of the tabs into the
appropriate slots, as much as possible
(3)
.
Be sure that the other end of the connecting hose
is attached to the opening of the air outlet of the
filter
(1)
.
Attach the manual blower to the bracket by means
of the connecting pins. Match the blower holes to
the pins on the adapter
(2)
.
Attach it by means of slightly rotating it
counterclockwise, and then turn it clockwise until
it stops turning
(3)
.
Start operation by alternately drawing and pushing
the blower.
The rate of operation is 30 cycles per minute. Make
sure that the indicator vane is rotating.
Step 2
Step 3
