Guangdong Be-Tech Security Systems LTD.
Total page -15 - page-6-
4.1.
Setting Process
Step 1 Move KEY_S to 2 and move V_SET to 1.
Step 2 Follow Figure 2 to connect PCB with the lift up button and the adapter.
Step 3 Make sure the line connecting is correct.
Step 4 Support 220V to the adapter.
Step 5 Press the SET button to renew the PCB.
NOTE
：
Don’t move KEY_S and V_SET under power state.
Follow the introduction on the adapter to use it.
Pay attention with the anode and cathode connecting.
Make sure the line connecting is correct before testing or using.
Follow the standard of company to choose the electrical line.
5.
Program on Software
5.1.
Program SID Card
Step 1 Turn on the V5.7.30.3 software
Step 2 Select “cards” on the menu, and click the System ID Card to call the menu
