Seite 19 von 24
HOW TO CORRECTLY USE THE REMOTE CONTROL
Point the remote directly at the front of the appliance and make sure there are no obstacles
between the remote control and the appliance.
NOTE
Please handle the remote control carefully.
Do not expose the remote control to direct sunlight and keep it away from heat
sources.
DESCRIPTION OF REMOTE CONTROL
ON/OFF
Cooling-Function
SPEED +
Timer
SPEED -
SETTING THE FUNCTIONS
The control panel of the appliance has the same buttons as on the remote
control, so all functions can be set directly on the appliance as well as by using
the remote control.
SWITCHING ON THE APPLIANCE
Press the ON/OFF key to switch on the machine.
As soon as you switch on the unit, it will run at "Low Speed".
If you want to put the machine in standby mode - press the ON/OFF button again.
NOTE
Never switch off the air cooler by pulling the plug directly from the mains.
Always press the ON/OFF button to switch it off, and wait a few minutes before
disconnecting the appliance from the mains. This allows the appliance to go through
a cycle of checks to verify its functionality.
SETTING THE SPEED
Use the
SPEED-button to set and adjust the speed of the blower.
The respective indication lights up on the display:
1 x press
Medium speed
2 x press
High speed
3 x press
Low speed
