Be Cool 7022 Y72, Manual, Page: 52 / 120

EN
52
the seat any further to avoid any permanent damage
of the seat.
WARNING! While travelling the car seat must always
be locked in the rearward-facing or rearward-facing
position.
Never use the seat in locked crosswise position or in
any unlocked intermediate postion while travelling.
INSTALLING THE CAR SEAT IN VEHICLE
BABY MODE G. 0-1 (REARWARD FACING MODE)
see images 14 - 46
Rearward Facing Newborn 4 years old Recline
position Position 4
15. Turn this seat in rearward facing, adjust the
postion at 4 shows.
1. Infant insert is for children’s protection. Child 0-6
months must use the full insert.
2. Infant insert includes head support and body
portion and wedge.
3. Please install the base on the vehicle seat
16.
4. After the child is placed into the seat, check
whether the shoulder harnesses are at correct from
proper height.
5. Please make sure the infant insert has the wedge
assembled before using it for infant.
17. 6. Detach the snaps on the head support, and then
remove the infant insert. Please refer to (Use Infant
Insert). To assemble head support in reverse steps.
7. After removing the wedge from the infant insert,
please store it in a place where the child can not
access it.