BE-DP(S)XXX USER MANUAL
5
Safety Labels
Your Flail Mower comes equipped with all safety labels in place. They are designed to help you safely
operate your implement. Read and follow their directions.
1. Keep all safety labels clean and legible.
2. Refer to this section for proper label placement.
To install new labels:
1. Clean the area where the label is to be placed.
2. Spray soapy waster on surface where the label is to be placed.
3. Peel backing from label. Press firmly onto the surface.
4. Squeeze out air bubbles with the edge of a credit card.
Wear Protective Equipment
• Protective clothing and equipment should be worn.
• Wear clothing and equipment appropriate for the job. Avoid loose fitting clothing.
• Prolonged exposure to loud noise can cause hearing impairment of hearing lose. Wear suitable hearing
protection such as earmuffs or earplugs.
• Operating equipment safely requires the full attention of the operator.
Avoid wearing headphones while operating machinery.
Avoid High Pressure Fluids Hazard
• Escaping fluid under pressure can penetrate the skin causing serious injury.
• Avoid the hazard by relieving pressure before disconnecting hydraulic lines.
• Use a piece of paper or cardboard, not body parts, to check for suspected leaks. Wear protective gloves
and safety glasses or goggles when working with hydraulic systems.
• If an accident occurs, see seek medical attention immediately. Any fluid injected into the skin must be treated
within a few hours or gangrene may result.
Safety Labels
Your Flail Mower comes equipped with all safety labels in place. They are designed to help you safely operate
your implement. Read and follow their directions.
1. Keep all safety labels clean and legible.
2. Refer to this section for proper label placement.
To install new labels:
a. Clean the area where the label is to be placed.
b. Spray soapy waster on surface where the label is to be placed.
c. Peel backing from label. Press firmly onto the surface.
d. Squeeze out air bubbles with the edge of a credit card.
IMPORTANT SAFETY INFORMATION (CONT.)
Part No. BE-DP(S)xxx
INTRODUCTION
Braber Equipment welcomes you to the growing family of new product owners. This implement has been
designed with care and built by skilled workers using quality materials. Proper assembly, maintenance and
safe operating practices will help you get years of satisfactory use from the machine.
Application
The Flail Mowers are designed for category 1 3-PT Hitch or quick-hitch system mounting. These Fixed Bar
Flail Mowers are ideal for ripping, leveling, finish grading and backfilling applications at feedlots, outdoor
arenas, building sites and maintenance operations on farms and roadways.
Using This Manual
• This Operator’s Manual is designed to help familiarize you with a safety, assembly, operation, adjustments,
troubleshooting and maintenance. Read this manual and follow the recommendations to help ensure safe
and efficient operation.
• The information over time to assure you of the best performance.
Terminology
“Right” or “Left” as used in this manual is determined by facing the direction the machine will operate while
in use unless otherwise stated.
