TRENCAB is a registered trademark
Patented Application no 2020902905
Australian owned, designed & manufactured
Designed for external or internal metal or timber domestic or light commercial grade gates, doors,
access panels etc.
The TML25 Mortice Latch body and Strike Plate can be installed to either the gate or post.
You will require a “Fixed Cam Euro Cylinder”
to suit the gate thickness.
OR
Flat spindle “Digital Hardware” to suit your application.
TML25 Mortice Latch Body and Magnetic Strike Plate are designed to be surface mounted.
The latch body has a 25mm backset measured from the rear of the faceplate.
Case depth is 38mm when surface mounted.
Face fixing will require a gap of 8mm to 12mm between the posts.
Magnetic Strike Plate depth is 21mm when surface mounted.
2 x 2.5mm Strike Plate Packers are included for larger gaps.
(The TML25 Mortice Latch body and or Strike Plate could be flush fixed but you will need to make your
own measurement adjustments)
IMPORTANT
Keep the
Magnetic Strike Plate
inside the plastic bag to install last after all metal shaving are cleaned
away as they will accumulate inside the magnetic strike plate cup and rust.
WARNING
Please
Do Not
use power tools to attach the TML25 latch body, euro cylinder retaining screw, escutcheons
or magnetic strike plate.
Do Not Lubricate
the TML25 Mortice Latch body.
There are no serviceable components inside.
Warranty will be void if latch case screws are removed.
The TML25 Mortice Latch
WILL NOT
act as device to
stop a swinging gate or door.
A suitable stopper must be installed.
TRENCAB TML25 Face Fixed Mortice Latch
