BDS C-4250 Service Manual Download Page 4

800.237.2303   

  503.538.8756   

  503.538.2845 Fax   

  www.beaverstatedental.com

3

Autoclavable HVE & S/E Valves

Maintenance

Autoclavable vacuum valves may be autoclaved by steam autoclave or a chemical vapor. 

Due to the tight clearances and hardness of the anodized surfaces, the valve spool can 

become jammed or seize in the valve if it is sterilized while contaminated with debris.

Valves can be quickly disassembled for cleaning.

1.  Pry one side of the lever and flip it off of the valve. For saliva ejector valves, remove 

the tip also.

2.  Push out the valve spool and clean all the disassembled parts in an ultrasonic cleaner 

daily. 

Rinse thoroughly before putting into autoclave.

3.  Lubricate the O-Rings on the spool with a silicone based lubricant before reassem-

AUTOCLAVABLE S/E LEVER VALVE, CHROME

112-280

ITEM  







 
 

PART DESCRIPTION 
Tip......................................................... 
Body..................................................... 
Spool................................................... 
O-Ring #10........................................ 
O-Ring, #12...................................... 
Swivel................................................. 
Lever.................................................... 
 
 
 
 
 

PART NUMBER 

112-174 
112-276 
112-278 
017-110 
017-012 
112-177 
112-181 

 
 

 

QTY 







 
 

AUTOCLAVABLE UNIVERSAL HVE VALVE

112-263

ITEM 

1
2
3
4
5
6

PART DESCRIPTION
O-Ring,  #13........................................
Body, Chrome...................................
Spool, Chrome..................................
O-Ring, #13........................................
Swivel.................................................
Lever....................................................

PART NUMBER

017-113
112-272
112-268
017-013
112-170
112-169

QTY

3
1
1
1
1
1

Summary of Contents for C-4250












Reviews: