49
Using
AkkuMAB 3000
ENGLISH
Inserting the tool
The machine is equipped with a 19 mm Weldon tool mount that can
accommodate core drills up to a length of 55 mm.
WARNING
Risk of injury!
Do not use damaged, contaminated or worn tools.
►
Change tools only when the machine is switched off and at a
►
standstill. Remove the rechargeable battery from the machine.
After inserting, check that the tool is engaged securely.
►
Only use tools, adapter and accessories that match the ma-
►
chine.
Core drill
Inserting the core drill
Before mounting, clean the Weldon shank and tool mount (2)
of the machine.
Check the the lead connection for lubricant.
Unscrew the two Allen screws in the tool mount using the Allen
key (A) supplied.
Insert the core drill in the tool mount (2).
NOTE
Insert the appropriate ejector pin (C) before inserting a core
►
drill.
Tighten the two Allen screws in the tool mount (2) using the
Allen key (A) supplied.
WARNING
Risk of injury from an incorrectly inserted tool!
Check the stability of the core drill.
►
Removing the tool
Loosen the two Allen screws in the tool mount (2) using the
Allen key (A) supplied and pull the tool downwards out of the
tool mount.
Summary of Contents for AkkuMAB 3000
Page 143: ......
