BDR Thermea Group 28220, Installation Manual

Page: 17 / 56

17 7668357 - v.09 - 15062020
9.2. Connect the climate appliance to the gateway (part F):
Cable requirements
Maximum length 20 m 80 m 120 m
Cross-sectional area 0.8 mm
2
1.0 mm
2
1.5 mm
2
10. Connect the climate appliance to the power supply.
11. Connect the power adapter (part H).
12. Insert the batteries (part E).
13. Awaken the thermostat.
14. Setup the RF and wi-fi connection:
14.1. Setup the RF communication between the gateway and the thermostat.
14.2. Setup the wi-fi communication between the gateway and the wi-fi router.
15. Position and mount the back plate (part C).
15.1. Determine the position of the back plate (part C).
15.2. Drill the 2 marked holes.
15.3. Fit the plugs (part B).
15.4. Secure with screws (part B).
16. Mount the thermostat on the back plate.
17.
17.1. Determine the position of the gateway.
17.2. Drill the 2 marked holes.
17.3. Fit the plugs (part B).
17.4. Secure with screws (part B).
18. Mount the cable strain relief clamps.
19. Mount the cover.
20. Secure with screw.
21. Test the RF and wi-fi connections.
22. If the wi-fi connection should not be sufficient, turn the antenna to a horizontal position.
3. Intended use
• The gateway is designed to operate as a communication interface between a climate appliance