BDI Vertica 8556, Assembly Instructions Manual

Page: 7 / 7

7
a s s e m b l y i n s t r u c t i o n s
bdi
usa.com customerservice@bdiusa.com
vertica
8556
home theater
CORRECT! Door is
sitting squarely and evenly
spaced on tops and sides.
INCORRECT! Door is
out of alignment with
the rest of the unit.
STEP 2 - Adjust Door Hinges (if needed)
The door on your cabinet should be evenly spaced and should open/close freely without rubbing against the door
frame.
If the door appear out of alignment, this condition can be corrected with minor adjustment to its European hinges on
each door.
Because these hinges are infinitely adjustable, adjusting one hinge element can sometimes cause the need for
adjustments to other elements. But with a few adjustments, you can modify the orientation of the door to make sure
that it is aligned within your cabinet.
Use the Push Rebound Mechanism (3) :
• By adjusting the dial Clockwise , the door will move IN
when closed.
• By adjusting the dial Counter Clockwise , the door will
move OUT when closed.
Use the Phillips Screwdriver (A) supplied to adjust Vertica's door
hinges:
• By adjusting Screw 1 , the door will move LEFT or
RIGHT within the frame. Make minor adjustments
at both top and bottom hinges for best results.
• By adjusting Screw 2 the entire door will move IN or
OUT, opening or closing the gap between the door frame
and cabinet. (This screw rarely needs adjustment.)
1.
2.
2.
1.
In
Out
3.