bdiusa.com
TERRACE
1153
CONSOLE TABLE
2
T2
Step 2 - Attach Leg Assemblies
With one hand, carefully position the
wood panel A1
on edge. With other hand, slide
1 leg assembly
into the
2 notches on the bottom of the
wood panel
aligning the attachment plates with the corresponding recessed
areas.
Make sure the threaded holes on the leg assembly face inward
. Loosely attach the leg assembly
with
8 screws H1
using
hex wrench T2
. Do not tighten the screws yet (otherwise the leg brace may not fit).
Attach the second leg assembly but do not fully tighten the screw until after the next step.
H1 x 8
H1 x 8
T2
T2
A1
T2
ATTENTION!
Threaded holes
face inward
Attachment plate
T2
T2
A1
H1 X 8
H1 X 8
ATTENTION!
Threaded holes
face inward
