bdiusa.com
STANCE
6650/6651/6652
LIFT DESK
3
Step 4 -
Attach
Keypad
C2
on the desired side (left or right) with
2 wood screws
H1
going into pre-drilled
pilot holes. Tighten with a
Phillips screwdriver
.
Step 5
- Position the control module
C1
so that the keypad socket
(labeled HS)
is facing the keypad and
secure between the 2 steel rails with
2 long wood screws H2
as shown going into the pre-drilled pilot holes.
Tighten with a
Phillips screwdriver
.
Step 6
- Route the keypad cord into the groove in the panel and through the hole in the metal frame. Plug the
end of the keypad cord into the HS socket on the
control module C1
. Use the
cord wrap (Kleet) H8
to
secure loose cords.
Cord Wrap
User’s right
hand side
User’s left
hand side
H1
H1
H2
H2
C1
C2
Hole in
metal frame
