BDI SOMA 1133 Instruction Manual Download Page 8

These distinctive product configurations are protected by US and international patents, trade 

dress, and/or copyright laws. Soma & BDI are trademarks of Becker Designed, Inc. All rights 

reserved. ©2022, BDI   |  

 

V.11.10.2022

Made in China

WARRANTY

PRODUCT REGISTRATION

BDI warrants to the original purchaser that for the below-stated warranty term, BDI will repair or 
replace any product, part, or component covered by this warranty that fails under normal use as a 
result of a defect in material or workmanship. BDI will repair or replace the aforementioned product, 
part or component with a comparable product, part or component. The decision to repair or replace 
will be at BDI’s sole discretion.

BDI furniture is warranted for three (3) years from the date of purchase as shown on your sales 
receipt. The warranty period starts from the date of purchase. This warranty extends only to the 
original purchasers who acquire new products from BDI Authorized Resellers. Any product, part, 
or component must have been assembled, installed, used, and maintained according to BDI’s 
published instructions to be eligible for warranty coverage. Any modification to the original 
product voids the warranty.

To view BDI’s complete warranty information, visit 

www.bdiusa.com/warranty

Registering your new BDI product allows us to send you important product updates, service 
information, and helpful hints related to your BDI products. Register today, and you will be entered 
to win free a BINK table from BDI: 

www.bdiusa.com/register 

Summary of Contents for SOMA 1133









Reviews: