SEQUEL
6003 Compact Desk
ASSEMBLY INSTRUCTIONS
6
BDIUSA.COM [email protected]
Step 10
Install Front Kick Panel
Place Desk in desired location. Once all of the electrical wires are
routed, install
Front Kick Panel (N)
as shown. Insert bottom edge of
Front Kick Panel (N)
into
Lower Horizontal Beam (L).
Tilt
Front Kick
Panel (N)
back until magnets hold panel in place. With the grippy side
Back Panel (O)
facing down, insert
Drawer Liner (P)
into the Drawer.
Note:
The Sequel™ Desk is designed to permit placement in front of an
electrical outlet for easier wiring access.
Step 11 (optional)
Attach Back Panel
Back Panel (O)
Sequel™ 6008 (sold seperately) is designed
to conceal wire management if desk is located in the middle
of a room.
Insert bottom edge of
Back Panel (O)
into
Lower Horizontal
Beam (L)
. Tilt
Back Panel (O)
foward until magnets hold
panel in place.
Front Kick Panel (N)
Back Panel (O)
Sequel™ 6008
(sold seperately)
Lower Horizontal Beam (L)
Lower Horizontal Beam (L)
Top edge of
Back Panel (O)
is angled
Drawer Liner (P)
