7
a s s e m b l y i n s t r u c t i o n s
bdi
usa.com [email protected]
sequel
®
6001
DESK
Step 7 (optional)
Attach Magnets to AC power strip/surge protector
Remove
Adhesive Foam/Magnets (I)
from the
Upper Horizontal Beam (N).
Peel
film from side of the
Adhesive Foam/Magnets (I)
and attach to clean, dry back side
of AC power strip (not included).
Cleaning of power strip surface with rubbing
alcohol will ensure best adhesive bond. **UNPLUG POWER STRIP FROM
POWER SOURCE BEFORE CLEANING**
Attach AC power strip/surge protector to inside of
Upper Horizontal Beam
(N)
as shown in illustration above.
Use the slot holes provided to run all wires to and from the desk. Keep all
wires behind folded metal lip—failure to do so will prevent
Back Panel (C)
and/or
Front Kick Panel (D)
from attaching properly.
4.
1.
2.
3.
I
N
1.
2.
3.
4.
