manualshive.com logo in svg

BDI MARGO 5201, Manual

Share
Download
BDI MARGO 5201 Manual Download Page 1

1

 

A1  

Left Shelf Frame x 1 

A2  

Right Shelf Frame x 1 

C1  

Shelf x 3 

C2  

Cabinet x 1

 

   

C3  

Door Facia x 1

 

   

Product Registration

Registering your new BDI product allows us to send you important 

product updates, service information and helpful hints related to your 

BDI products. Register today, and you will be entered to win free a 

BINK table from BDI: www.bdiusa.com/register 

Placement and Maintenance

Your Margo Shelf is designed for indoor use on level floors. 

Clean wood veneer and steel parts with a moist cloth. 

Margo is engineered for easy assembly. Carefully follow this procedure to 

prevent any damage. Do not use power tools for assembly of this product.

Step 1 

This unit ships in 3 cartons (metal frames, cabinet & shelf, and sliding door 

front) Unpack all cartons and associated hardware bags. Identify the parts 

listed below. The assembly workspace should be a non-marring surface 

such as carpet. For missing hardware pieces, contact BDI Customer 

Service at: [email protected].  For all other concerns, please 

contact your BDI retailer. 

bdiusa.com

[email protected]

Designed by Jeff Bare.
These distinctive product configurations are protected by US and international patents, trade dress, and/or 
copyright laws. Margo & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2019, BDI
Made in China. 8.06.2019  V7

MARGO

™  

5201

Shelf

 

H1  

M6 x 38 mm  

Pan Head Screw x 12

H2  

M6 x 12 mm  

Pan Head Screw x 2

H4  

Wall Anchor

Strap x 2

H3  

Thumb Screw x 2

Component List

T1  

Hex Driver    x 1 

T3  

Leveler wrench   x 1

T2  

Small Hex wrench    x 1 

Summary of Contents for MARGO 5201









Reviews:

No comments

Brands by name

Popular brands

Load more brands