BDI Icon 9423 Assembly Instructions Download Page 2

Page: 2 / 4

Back panel

Step 2

install frame onto base.

Use twisting motion and make sure frame is
completely seated on base . There should be 1/
16" gap between wood base and steel frame

Install Levelers x 6

adjust levelers so base is level and stable.

x 6

x 1

Step 1

installing the arm

Summary of Contents for Icon 9423

Page 2: ...Use twisting motion and make sure frame is completely seated on base There should be 1 16 gap between wood base and steel frame Install Levelers x 6 adjust levelers so base is level and stable F x 6 x 1 H Step 1 installing the arm D ...

Page 3: ...t straps velcro straps are supplied to control cables they can be screwed into the steel at top and bottom of the arm or into the small holes on the back panel Step 3 installing the Shelf brackets shelf brackets can be adjusted to offer three different shelf positions K L x 2 E H 1 16 GAP x 2 brackets E H E ...

Page 4: ...t washers to the stainless pucks prior to glass installation Note leave screws loose until all screws have been installed Then tighten securely It may be necessary to loosen shelf brackets to obtain proper fit Once fitted tighten securely Shelf Glass Use 2 x C Use 2 x B Becker Designed Inc 14101 A Parke Long Ct Chantilly VA 20151 www bdiusa com ...