Your Hokkaido Table™ is designed and engineered for easy assembly. Carefully follow
this procedure to prevent any damage.
Placement and Maintenance
Hokkaido Table™ is designed for indoor use on level floors. Clean glass with glass
cleaner; clean steel parts and wood veneer with a moist cloth.
Step 1 - Unpack and identify parts listed below.
The assembly workspace should be a non-marring surface such as carpet. For missing hardware
pieces, please contact BDI Customer Service at: [email protected] For all other concerns
please contact your local BDI Retailer.
www.bdiusa.com
Designed by Matthew Weatherly
‘Hokkaido’ is a trademark of Becker
Designed, Inc. All rights reserved.
©2006 Becker Designed, Inc.
Step 2 -
Lay
glass panel (A)
so that the pucks are facing up.
Step 3
- Install
short metal leg (C)
to glass puck.
Step 4
- Lay
wood panel (B)
onto previously installed upper legs. Note* finished wood side facing downward.
Step 5
- Install
long metal leg (D)
through wood panel hole and into the threaded hole of short metal leg (C).
Step 6
- Flip assembled unit over onto base leg position.
B
- Wood Panel x 1
A
- Glass Panel x 1
C
- Short Metal Leg x 4
D
- Long Metal Leg x 4
Glass Puck
